AD-16 DC9V AC Adapter The ZOOM AD-16 is an AC power adapter designed for use with Zoom's effects pedals and rhythm machines. SPECIFICATIONS Rated Input: AC100 - 240V Rated Output: DC9V / 500mA (center negative) Compatible with: 1010, 1202, 1204, 2020, 2100, 3000, 3030, 4040, 5000, 5050, 504, 504II,…
ROCKPOWER RPNT13 9V DC 2000MA POS CENT 2.1MM PSU
The 1 SPOT is the original 9V pedalboard power supply that only takes up one spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years, and does so with quiet, reliable performance! Handles from one to well over twenty guitar pedals (1700mA…
For use with the Line 6 ToneCore series, this DC power supply is for use in the USA, Canada, and other countries with 120-Volt power standard. Features a US-style power plugs and 120-Volt operation.
ROCKPOWER RPNT6 - 9V DC 2000MA - NEG CENTRE 2.1MM
RockPower NT 50 Power Supply Combo Pack, 9V DC, 1.300 mA, (-) centre + Daisy Chain w/ 5 outputs, EU Plug 100-240V, 9V DC, 1300 mA FEATURES - switching power supply - stabilised voltage - input voltage 100-240 V~ - 9V DC - 1,300 mA - 2.1 x 5.5 mm barrel plug - polarity (-) centre - EU plug -…
…generation power supply for today’s digital instruments -500 mA of current to easily power multiple pedals, even digital ones -Power cable length is increased to almost 10 feet -LED indicator for quick visual verification of on/off status -New design which does not cover adjacent power outlets…
…No more worrying about your 9V batteries dying mid song. You can also forget about searching for a wall outlet on stage to power your pedal board. The RockBoard RBO Power LT XL is equipped with powerful and long-lasting, rechargeable lithium-ion batteries, to supply effects pedals up to approx.…
…No more worrying about your 9V batteries dying mid song. You can also forget about searching for a wall outlet on stage to power your pedal board. The RockBoard RBO Power LT XL is equipped with powerful and long-lasting, rechargeable lithium-ion batteries, to supply effects pedals up to approx.…
…hook up your pedals permanently underneath your board and have a central access point from your instrument and to your amp as well as for your power supply. For example, your instrument will plug into the front of A with the back of A going to the input of your first pedal on your RockBoard®.…
Features: - Switched-mode power supply - Stabilised voltage - e.g. for DigTech Whammy DT or Whammy 5 - Input 100-240 V~ - 9V DC - 1,300 mA - 5.5 mm (outside) / 2.1 mm (inside) plug, (-) inside
…has made musicians’ lives easier with the 1 SPOT, the original compact pedalboard power supply. It works so well that a lot of musicians never felt the need to get one of those brick-style power supplies, and we here at Truetone didn’t see the need for those either, even though they were…
…each) output the Power Block has 2 x 18 V (400 mA each) outputs as well. This power supply provides 2,000 mA total output and comes with 10 connection cables as well as a mains adapter. FEATURES/SPECS - multi power supply for effects pedals - input voltage 18V DC 2.000 mA - 8 x 9V DC outputs,…
…has made musicians’ lives easier with the 1 SPOT, the original compact pedalboard power supply. It works so well that a lot of musicians never felt the need to get one of those brick-style power supplies, and we here at Truetone didn’t see the need for those either, even though they were…
…Power Block is a compact power supply, delivering current for 10 effect pedals. Be-sides 8 x 9 V (150 mA each) output the Power Block has 2 x 18 V (400 mA each) outputs as well. This power supply provides 2000 mA and comes with 10 connect cables and a mains adapter. Features: RockBoard Power Block…
…need a reliable power source, the M48 Phantom Power Supply is just the tool for the job. EQUIPPED FOR ANY STAGE OR STUDIO PLUG IN POWER YOUR GEAR Perfect for all of your gear that requires Phantom Power like condenser mics. RELIABLE GET ALL THE VOLTAGE Some "48v Phantom Power" supplies don't quite…
Features: - Switched-mode power supply - Stabilised voltage - e.g. for MXR Phase 90, MXR Carbon Copy or Way Huge Green Rhino - Input 100-240 V~ - 9V DC - 200 mA - 5.5 mm (outside) / 2.1 mm (inside) plug, (-) inside
…(analog) power supply for high-current DSP-based pedal effects and accessories. With 4 completely isolated, filtered, and regulated output sections, Pedal Power Digital keeps your pedals dead quiet and free from high-frequency noise that occurs with digital "switching" power supplies. Pedal Power…
…mA each) output the Power Block has 2 x 18 V (400 mA each) outputs as well. This power supply provides 2,000 mA total output and comes with 10 connection cables as well as a mains adapter. FEATURES - multi power supply for effects pedals - input voltage 18V DC 2.000 mA - 8 x 9V DC outputs, grouped,…
RockBoard Power Ace Set, 9V DC PSU + Accessories FEATURES/SPECS - Rockboard power supply for multiple effect units - 9V DC - 1,700 mA output - 2.1 x 5.5 mm barrel connector (-) centre polarity - for up to 8 effect units - input voltage 100-240 volts (automatic voltage adjustment) - high quality…
…Phantom Power Using a single 1.5V AA battery, the Battery-Operated Power Supply outputs 9V of phantom power for energy-efficient electret mics including Audix lavalier, hanging, boundary plate, and headset models. • Adapt Standard Phantom Power for Electret Mics The Phantom Power Adapter also…
Line6 DC 3-G, power supply for POD HD series, input = 100-240V AC, 1.0A 50-60 Hz, output = thomann 9V DC, 3A (27W max). Plus outside, minus inside
…mini jack, Maximum Output level: 5V) - MIDI: MIDI IN Power - Battery Life: Approximately 10 hours (using alkaline batteries) - Power Supply: AA alkaline battery × 6 or AA nickel-metal hydride battery × 6 Or AC adapter (DC 9V) (optional) Others - Accessories: Takes AA alkaline battery…
…default glissando rate is 60 milliseconds when nothing is plugged into the EXP input. The Pitch Fork comes equipped with an EHX 9.6DC-200mA power supply and also runs on a 9Volt battery. - Transposes over a +/- three octave range - Three shift modes: up, down or dual - 11-position Shift knob selects…
…Voltage Selector Switch - 15 or 18 Volts. Simply plug in the power adapter to your existing power source, switch the voltage to either 15 or 18 volts and plug into your pedal. The Xotic Voltage Doubler delivers clean, consistent power with the lowest possible noise. WHY DO YOU NEED AVOLTAGE DOUBLER?…
…use of switching power supply technology to alleviate this condition in an economically-, energy- and environmentally-conservative way. The 1 SPOT power supply was designed to replace many such external power supplies and/or batteries simultaneously. It provided plenty of power with a very low noise…
…compartment of most commercial aircraft. Specifications Overall Length: 41.5" Body Length: 20.8" Frets: 24 Neck scale: 34" Neck radius: 15" Weight: 8.0 lbs Bridge Spacing: 19mm Nut Width: 1.60" 12th Fret Width: 2.19" Power Supply: 9V Standard strings: D'Addario™ EXL170 Nickel Round Wound
…compartment of most commercial aircraft. Specifications Overall Length: 42.25" Body Length: 20.8" Frets: 24 Neck scale: 35" Neck radius: 15" Weight: 8.2 lbs Bridge Spacing: 18mm Nut Width: 1.85" 12th Fret Width: 2.54" Power Supply: 9V Standard strings: D'Addario™ EXL170 Nickel Round Wound
…compartment of most commercial aircraft. Specifications Overall Length: 41.5" Body Length: 20.8" Frets: 24 Neck scale: 34" Neck radius: 15" Weight: 8.0 lbs Bridge Spacing: 19mm Nut Width: 1.60" 12th Fret Width: 2.19" Power Supply: 9V Standard strings: D'Addario™ EXL170 Nickel Round Wound
…the 8-plug cable included in this Combo Pack, you can power up to 8 pedals, and by linking additional Multi-Plug cables, you can power a virtually unlimited number of pedals! The 1 SPOT Combo Pack consists of a 1 SPOT 9V DC power supply, Multi-Plug 8 Cable, (2) Battery Clip Converters, (2) 3.5mm…